Mold Expert Consultants


Visit: Mold Remediation Quote and Mold Remediation Bid

Mold Experts Phillip and Divine Fry Announce Expanded Independent Mold Clearance Testing of Mold Remediation Projects Done by Any Company Anywhere in the USA

Dec. 21, 2014. Montrose, Michigan. Mold consultants and Certified Environmental Hygienists Phillip and Divine Fry have premiered expanded, independent, in depth clearance mold inspection and testing to evaluate the mold removal effectiveness and success of any companyís completed mold remediation projects in Detroit, Cleveland, Columbus, Pittsburgh, Philadelphia, Indianapolis, Chicago, Des Moines, or anywhere else in the USA plus Ontario Province in Canada.

Most mold remediation companies fail to find and remove all of the toxic mold infestations often still present and remaining in the remediated homes and commercial buildings because the companies:

1. Donít utilize a fiber optics cable with video camera, or, alternatively, open up ceilings and walls, to inspect inside ceiling, wall, and floor cavities for hidden mold growth.  If a residence or building has experienced roof leaks, siding leaks, plumbing leaks, or flooding, there is likely to be widespread, hard-to-find mold infestation inside wide areas of ceilings, walls, and floors.

2. Donít do mold inspections carefully, thoroughly, and professionally inside attics, crawl spaces, basements, and heating, ventilating, and air conditioning (HVAC) equipment and ducts. HVAC systems are often mold factories that grow and distribute large numbers of airborne mold spores throughout the entire building. Learn more about HVAC mold problems at

3. Use ineffective bleach that does not kill mold instead of effective EPA registered fungicides such as safe-to-use, non-toxic, and low-cost TimBor. Read the TimBor material safety data sheet (MSDS) at

4. Use untrained and unsupervised workers to do mold cleanup and remediation services that are best done professionally by Certified Environmental Hygienists and Certified Mold Remediators such as the professional staff of EnviroFry.  Read EnviroFry training certifications, experience, and client testimonials  at  Mold training is available at

5. Donís use high-tech and effective mold remediation equipment and processes such as high output ozone gas treatment, air scrubbing with both HEPA and activated carbon filters, and the encapsulation of treated surfaces with antifungal products such as TimBor. Read about ozone gas treatment of mold infestations at

6. Donít mold test the air of all rooms and areas, including the attic, basement, crawl space, and the outward air flow from HVAC ducts.

For more information about mold clearance testing procedures and services, phone Phillip Fry toll-free 1-866-300-1616 or Phillipís cell phone 1-480-310-7970, or email

Mold Growth Lab
Grow, count, and identify only living mold spores in your self-collected Mold Growth Lab surface samples, air samples, and bulk physical samples worldwide, both before and after mold remediation with mold growth Petri lab dishes from Mold Growth Lab.
Mold Growth Lab provides you with easy-to-follow mold testing steps to use both Mold Growth Lab surface samplers and Petri lab dishes to collect possible mold growth on any surface, in room air, in the outward air flow from heating/cooling air ducts, and on mold growth on building material physical specimens.
You can self-observe the lab dishes for 7 days to know: (1) is it mold? (2) is the mold alive? (3) how many mold colonies grew in the 7 day observation period.  Only living mold spores will grow in the special mold food habitat inside the Petri lab dishes. Each living mold spore will grow a separate, distinguishable, countable, and identifiable mold colony. Dead mold spores will grow NO mold colonies.
After the 7 day culture growth time period, each lab dish can be analyzed by our partner mold analysis lab to identify and quantify the mold colonies that have grown during that 7 days, and then provide a written report with such mold species identification and quantification.

For more information on mold inspection and mold lab analysis, email Phillip Fry or phone toll-free 866-300-1616 or cell phone 480-310-7970 or visit  


[Home] [Mold Removal Cost] [BBB Membership] [Fraudulent Mold Testing] [Water Line Break Prevention] [Mold Clean Up] [New Home Mold] [Top Mold Questions] [Mold Inspection 10 Steps] [Kill Toxic Mold] [Client Testimonial Letter] [New Years Resolution 2014] [What Mold Inspectors Don't Tell] [12 Mold Removal Problems] [Free Mold Advice Hotline] [DIY Mold Testing] [Mold Clearance Testing] [Fry in Health & Fitness Magazine] [Hong Kong Mold Inspector] [Hong Kong Mold Inspection] [Mold Contractor] [Top 100 Mold Health Problems] [Air Mold Testing Inadequate] [6 Responses To Mold] [W.H.O. Mold Report] [Mold Toxins Widespread] [Mold Q & A] [Mold Prevention Steps] [Bacteria Mold Spread by People] [Spreading Fungal Diseases] [Why Mold Is Dangerous] [Visual & Smell Mold Detection] [More Client Testimonials] [Prevent Construction Mold] [Hong Kong Mold News] [Toxic Mold Public Health Warning] [Carpet Health Problems] [Toxic Mold Sources] [Air Duct Cleaning Quarterly] [Certified Air Duct Cleaning by Phillip] [Air Duct Cleaning Protocol] [Environmental Hygienists Seminar] [Mansion Mold] [Flat Roof Mold] [Medical Mold Testing] [Ozone Use Questions] [Enzymes Kill Mold] [Enzyme Mold Killing] [Overseas Mold Services] [Sewer Backup Insurance Claim] [Second Mold Opinion] [Fiber Optics HVAC Inspection] [Environmental Inspector] [Prevent Mold Legal Problems] [Mold Poisoning] [AntiFungal Herbs] [Mold Cross-Contamination] [Bathroom Mold] [Attic Mold Removal] [Basement Mold Removal] [Crawl Space Mold Removal] [Mold Removal Blasting] [Weather Mold]