Mold Remediation Quote
Mold Remediation Bid
Sept. 29, 2014
EnviroFry Announces 65 Ft. Long Cable Video Camera
To Inspect Inside HVAC Ducts and Buildings
“EnviroFry has begun its use of a special 65 feet long fiber optics
inspection cable with color video camera, video TV display monitor, and
video recording for toxic mold and bacterial inspection inside clients’ home
and workplace heating/cooling air ducts, walls, ceilings, floors, attics,
and crawl spaces,” announces Phillip Fry, EnviroFry co-manager, Certified
Environmental Hygienist, and webmaster since 1999 of the mold information
as well as
EnviroFry will use its new inspection video camera to check out and evaluate
mold and bacterial problems in residences, commercial buildings, and public
buildings located in metro Detroit, Grand Rapids, Chicago, Milwaukee, St.
Louis, Indianapolis, Columbus, Cleveland, Cincinnati, Louisville, Nashville,
Atlanta, Charlotte, Pittsburgh, Philadelphia, Washington, D.C., New York
City, and most other areas in Midwestern, Eastern, and Southern USA.
Mold and bacterial infestations are common inside the heating, ventilating,
and air conditioning (HVAC) equipment and ducts. The two best ways to
inspect a HVAC system are to: (1) inspect all supply and return air ducts
with the 65 foot long fiber optics cable with video camera; and (2) collect
a sample of the outward air flow from a HVAC air supply duct for mold lab
analysis to identify and quantify mould growing inside the HVAC system.
For in depth information on air conditioner and central air conditioning
system mold growth problems, visit
Exposure to elevated levels of indoor toxic mold can cause over 100 major
illnesses. Read all about mold health problems at
www.moldinspector.com and in Phillip Fry’s ebook Mold Health Guide,
To schedule fiber optics video camera inspection or other mold inspection
and testing services for a residence or workplace, email Phillip Fry
firstname.lastname@example.org, or phone Phillip toll-free 866-300-1616,
810-639-0523, or cell phone 480-310-7970, or visit the website
Mold Growth Lab
Grow, count, and identify only living mold spores in your self-collected
Mold Growth Lab surface samples, air samples, and bulk physical samples
worldwide, both before and after mold remediation with mold growth Petri lab
dishes from Mold Growth Lab.
Mold Growth Lab provides you with easy-to-follow
mold testing steps to use both Mold Growth Lab surface samplers and
Petri lab dishes to collect possible mold growth on any surface, in room
air, in the outward air flow from heating/cooling air ducts, and on mold
growth on building material physical specimens.
You can self-observe the lab dishes for 7 days to know: (1) is it mold? (2)
is the mold alive? (3) how many mold colonies grew in the 7 day observation
period. Only living mold spores will grow in the special mold food habitat
inside the Petri lab dishes. Each living mold spore will grow a separate,
distinguishable, countable, and identifiable mold colony. Dead mold spores
will grow NO mold colonies.
After the 7 day culture growth time period, each lab dish can be analyzed by
our partner mold analysis lab to identify and quantify the mold colonies
that have grown during that 7 days, and then provide a written report with
such mold species identification and quantification.
For more information on mold inspection and mold lab analysis, email Phillip
email@example.com or phone toll-free 866-300-1616 or cell phone
480-310-7970 or visit